A decorative molding serves as a any continuous projection that is used to further improve the look of a wall. In ancient Greece, these were first accustomed to throw water from the wall. The contours, measurements, and projections of moldings vary greatly.
One kind of molding - the frieze (or frieze board) - was utilized on the Parthenon at the Acropolis. The frieze is regarded as element of the Greek architectural style.
The Parthenon was built for the goddess Athena. The frieze moldings which are used were meant to tell the storyplot of her conquer Poseidon in succeeding as the patron from the ancient city that is now Athens.
The frieze panels are a series of designed pediments that happen to be filled up with the images of Athena's birth and rise to power. Today, a frieze board could be the lcd just under a crown molding or cornice. Often, low relief is applied to this panel with regard to added decoration.
Today, frieze moldings are most popular as a percentage of a decorative molding that follows the neoclassical architecture or decorating style.
You will need a pretty high ceiling (a minimum of 9 feet), and it is best if you stain or paint the frieze and also the crown molding the same color. The frieze is a great method to visually bring the ceiling down making the space appear cozier.
Crown molding is regarded as the popular kind of cornice molding. Crown molding is commonly a single-piece of decorative molding, installed at the top of a wall, with an angle towards the adjoining ceiling. However, I have come across crown molding assemblies of 5 or even more pieces in elaborate settings.
Crown molding often carries a profile that projects from the ceiling and on the wall, adding a wealthy appearance to some room. It is often used near the top of cabinets or built-in furniture.
Introducing such a decorative molding to a not at all hard room gives a historic character how the room would not otherwise have. Crown molding can be in combination with other moldings to add details to fireside mantels and shelves. (For it's worth, this might be the most popular architectural feature).
Crown molding can be a way of Cornice Molding. The phrase "cornice" describes molding installed down the top of a wall or more your window. If this treatment solutions are made out of multiple pieces of molding, stage system a "build-up cornice." One other kind of cornice molding could be the Cove Molding.
Cove molding is very comparable to crown molding, sticking with the same application and performance. The main difference between the two is within the profile. Cove molding has a concave profile (which bows inward) while crown molding includes a convex (outward) profile.
While crown is most in your house in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. You don't normally see multi-piece assemblies of cove moldings. It is possible to occasionally see it "beaded" at upper and lower for the little accent.
Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.
Kitchens and other more functional regions of the home could possibly be in places you will discover the better kind of the cove molding. Over the years, coves and crowns are getting to be more compact, but a majority of still bear the styles and shapes with the original Greek and Roman designers.
Chair Rail Molding
A seat rail is really a decorative molding that divides a wall horizontally, usually about 32" to 36" above the floor. They protect the walls in locations damage might occur from people waking up beyond chairs.
Because of this, the greater traditional chair rails may nosing in the center, with curved and beveled surfaces that taper time for the wall above and under the nosing.
Today, chair rails remain a common detail in traditional interiors. They serve the decorating effect of unifying the various architectural specifics of a room, for example door and window trim, and fireplace surrounds.
Chair rail can also be used like a cap for wainscoting or another wood paneling. This decorative molding adds a sense detail and charm while achieving continuity inside a room by unifying various decorative elements.
Panel molding, commonly called a picture frame molding, seems like a substantial empty frame, and it is often a part of designs on walls of old Colonial and, Georgian, and Early American homes. The position of this molding needs to be across the chair rail height and about Ten to twelve inches below the ceiling.
How big this kind of decorative molding, measuring 1" to 3" wide, should be proportionate towards the ceiling height from the room. Like the other moldings, panel molding adds a sense of charm and delicate detail to some room.
Wall framing appears on the Georgian duration of American architecture, when plaster begun to replace wood panels around the walls. Panel molding is another great way to divide walls into large, eye appealing units, devoid of the same worth of full wall paneling.
Another application of this versatile molding would be to trim openings created by wider planks that happen to be assembled as rails and fashoins. Often, the centers of these frames are left open. Through the use of panel moldings around the perimeter from the opening, you create the feel of a photo frame.
After this decorative molding is painted within the same color since the surrounding walls, you achieve a sculptural quality into a wall, adding texture and shadows. If moldings are painted in contrasting colors, they can build a striking three dimensional appearance, giving depth and dimension. Such a treatment is popular for staircases and entries.
Baseboard & Base Molding
Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings and other irregularities the location where the wall meets a floor. Base moldings provide the floor line an increased profile, and is as elaborate or simple as you wish.
Whereas it can be not too difficult to set up chair rail on a level plane, baseboard (like crown) might be tricky should your floors (or ceilings) are not level. For that reason, I suggest obtaining a professional woodworker for your installing of these moldings.
As one remedy to uneven floors, you can install a "shoe molding" across the bottom front edge to get the baseboard a finished look. Something different that can be done with baseboard (as well as together with the toe kick of one's cabinets) is incorporate accent lighting.
It is not in line with the pure traditionalist, yet it's a reasonably nifty strategy to have accent lighting throughout the perimeter of a room. You couldn't try this until they made the small LED rope lights nowadays.
Rope lights are available in different lengths and colours, and is easily installed behind baseboard. Simply make a notch from the back side from the baseboard, towards the top, and run the rope lights in to the notch.
This can be more frequently employed in commercial spaces, but has become added in entries and hallways - especially in contemporary homes.
When you have a curved wall or arch, it is possible to sure enough have a great craftsman build a curved molding for about 3 times the price tag on an upright molding. Or, you can buy a versatile molding approximately around the same price because the straight one.
These let you install moldings onto curved surfaces or arches, with no delay and expense of getting them created from wood. The stock profiles (you can find hundreds) are identical on the rigid versions plus they are compatible in terms of paint finish is worried.
More info about moulding.vn please visit webpage: this site.
|Created||23 Jun 2020|
|Recent average credit||0|
|DNA@Home credit||0 total, 0.00 average (0 tasks)|
|SubsetSum@Home credit||0 total, 0.00 average (0 tasks)|
|Wildlife@Home credit||0 total, 0.00 average (0 tasks)|
|New members in last day||0|
|Total members||1 (view)|
|Active members||0 (view)|
|Members with credit||0 (view)|