1) Message boards : News : [wildlife] app version 0.32 (Message 7303)
Posted 12 Sep 2017 by Peppernrino
uh... are we done? running out of work units today on my main rig.
2) Message boards : News : [wildlife] new app: EXACT MNIST BATCH (Message 7206)
Posted 15 Jul 2017 by Peppernrino
i went into the BIOS and disabled some dummy settings that i think crunchers should generally know, but aren't talked about in enough places. So here goes:

turn off c1e
turn off c6 state
turn off turbo
turn off cool n quiet
turn off apm

and there was another timing thing that i turned off, i'll figure it out after a restart and post here.

anyway, i've got everything back to full blast 100% and have had NO errors since.
3) Message boards : Cafe : BOINC Telegram group! (Message 7101)
Posted 31 May 2017 by Peppernrino
We have created a non-team-partisan BOINC Telegram group!


Everyone from any team is welcome to join and further BOINC development, or just to chat!

4) Message boards : News : [wildlife] new app: EXACT MNIST BATCH (Message 7079)
Posted 26 May 2017 by Peppernrino
update: i installed even newer GPU drivers and while doing the settings, i ended up finding out that my monitor was dummy switched to shut off every 15 minutes... i'm thinking that Amicable Numbers wasn't able to start the GPU in such a high kernel mode while sleeping... but still only occured in tandem with CSG tasks. so weird. i will post this to their forums shortly as well.

i also increased the RAM and page/swap file availability to 95%, and turned BOINC to "Run always" instead of "Run based on preferences", even though my preferences are set to 100%.

the RAM usage is also reduced quite a bit on the Norm 0.30 tasks. i am now running 8 work units happily. feels very stable and smooth. :D
5) Message boards : News : [wildlife] new app: EXACT MNIST BATCH (Message 7018)
Posted 2 May 2017 by Peppernrino
no worries. i understand the g-check. :P

it seems to occur randomly-ish after about 10 minutes. might even just be when in tandem with amicable numbers, as they are pretty heavy on the gpu. like a mixture of both, maybe?
6) Message boards : News : [wildlife] new app: EXACT MNIST BATCH (Message 7012)
Posted 2 May 2017 by Peppernrino
indeed, that was my first thought as well. i thought it was amicable numbers, so i reinstalled gpu driver and turned down the kernel mode, but the problem persisted. it's been good since i turned off csg. i could try to turn it on again if you like... full disclosure: i've heard of google before. :P
7) Message boards : News : [wildlife] new app: EXACT MNIST BATCH (Message 7009)
Posted 2 May 2017 by Peppernrino
sorry. for the record:

Windows 8.1 Pro WMC x64
AMD FX-8350 no overclock
16GB RAM @ 1866
8) Message boards : News : [wildlife] new app: EXACT MNIST BATCH (Message 7008)
Posted 2 May 2017 by Peppernrino
when i began citizen science grid, i was getting bsod's until i reduced amount of work units to 4 at a time. figured it was just RAM-heavy.

i started getting bsod's yesterday... i narrowed it down to citizen science grid. i think it might be the new work units. the error was: KMODE_EXCEPTION_NOT_HANDLED
9) Message boards : News : [wildlife] status update (Message 6915)
Posted 17 Apr 2017 by Peppernrino
my credits have also had a substantial and exponential decrease.


for the record, i have kept the same settings throughout, and running 99.9% of the time. :)

hope i could help!